• Welcome to this forum . We are a worldwide group with a common interest in Birmingham and its history. While here, please follow a few simple rules. We ask that you respect other members, thank those who have helped you and please keep your contributions on-topic with the thread.

    We do hope you enjoy your visit. BHF Admin Team

Longbridge Factory

great photo mike...hard to imagine it once looking like that...trying to work out todays view...we can clearly see the train tracks on your 1937 map and your red arrow marks the spot where the photo was taken showing the bridge over the river rea. here is todays view of the train station on longbridge lane so i assume the photo was taken just a little further down from the station...difficult to be precise as the area has changed so much ..lyn

 
In addition to Wellingborough, Beans and Coventry (Morris Engines), cylinder blocks and heads were supplied by West Yorkshire foundry in Leeds. In the 1970's and 1980's, I worked for the company that supplied the different coloured block and head paints for all of these sites.
What was the name of the paint supply company you worked for? Can you remember if yellow was supplied to Longbridge?
 
Only just picked up this thread as I'm not able drop by too often.
Re the pictures of actual cars,
Picture with 2 women, 1 male, 1 child +1 lady bystander -
1753284034490.png

isn't that a Bean ?
 
Only just found this this thread on this site. Caught my eye as although I wasn't employed by Austin-Rover/MG Rover I spent 2/3 days (sometimes nights as well) a week over 15 years at Longbridge as a Honeywell contractor looking after the energy controls and BMS or what Longbridge called CEMS (Central Energy Management System). I got to know a huge number of people everywhere as I had to visit pretty well all parts of the works and offices North/South/East and West.
Reading the hisory of Longbridge it appears that The Cofton gearbox works was built quite late which I hadn't realised and isn't shown on a lot of maps.
Sadly, now all gone which I'm constantly reminded of when my wife likes to go shopping there.
Alan Marriott
 
Hi there! I have lived quite close to the Longbridge works since 1995 and have seen many changes, although I have never worked there. I remember Lowhill Lane and most of the surrounding roads being clogged up with parked cars when the factory was fully functioning. Then when everything went wrong and the place closed in 2005 the area suddenly became a bit of a ghost town almost overnight. I know people who lost there jobs but were lucky enough (or so they thought) to gain similar employment at the Peugeot plant at Ryton. Having sold up and moved to the Coventry area many of them lost their jobs again after a very short time when Peugeot then pulled the rug out from under them for a second time. It ruined many people after selling their houses at a loss as house prices in the Longbridge area plummeted, and taking out a fresh mortgage in Coventry only to then face the threat of re-possession. Gradually house prices around Longbridge came back up as over the years it was seen as a nice quiet area to move to on the edge of the countryside for those who had alternative jobs.
Regards, Chris.
 
Hi there! I was always fascinated by the building known as the 'Flight Shed' at the lower end of Lowhill Lane. It seemed an unusual place to have what seemed to be a WW2 aircraft hangar, until I gradually began to uncover and understand the fascinating history of the factory and the part it played during the war years. I used to drive past it every day on my way to work and often used to go for walks and would purposely go and have a closer look at it through the railings. If one was to stand on the grass bank on the other side of the road in Cofton Park, you could get a good view of the inside of the geodexic roof structure through the windows that ran around the upper edge of the building. It looked a bit like the fuselage of a Wellington bomber but on a massive scale.
I was lucky enough to meet a chap at one of the Longbridge car rallies in Cofton Park who told me of a great web site called 'Austin Memories', which has been formed by a dedicated group of local historians keen to preserve and promote the rich history of the factory and the social history surrounding it. On the website. if you go onto the list at the side of the screen and click on 'Aircraft Production', then scroll down to the very end there is the most amazing piece of film showing the production of Hawker Hurricanes in the Flight Shed during WW2. Full airframe assembly is shown being carried out as well as the installation of Rolls Royce Merlin engines (by people who look as though they may have once lived in my street) and in the upper background the roof structure can clearly be seen. It then shows the completed aircraft being carried up onto the airfield via a lift type platform which ran on rails up the hillside at the rear of the building. The film ends with a Hurricane being flown out from the airfield with a clear view of a hill in the near distance with a clump of trees on the top (Frankley Beeches).
These were not the only aircraft built at the Longbridge factory. Across the road (Groveley Lane) from the flight shed was another less obvious aircraft hangar where Avro Lancaster fuselages were built and shipped out by road for final assembly elsewhere. Other aircraft built there was the Fairey Battle, and sub-assemblies for the De Haviland Mosquito. This building was later to be used for engine developement and gearbox production in the post war years, and I believe right up to the end of the factory's involvement with BMW, whereupon it was demolished to make way for housing.
One day as I drove past the flight shed, I noticed a sign attached to the railings saying that a demolition company was on sight with work having already begun. As I work in the motor vehicle heritage sector, I informed my work colleague who looked quite shocked. Being fully aware of it's historical significance he quickly got in touch with the demolition company and arranged for us to go and salvage a piece of the roof structure, as only two examples of this type of hangar roof survived in Britain at that time; Longbridge, and the old Supermarine factory at Southampton which was then occupied by Ford and where Transit vans were being produced.
We went with a Land-Rover and car trailer, and in very wet weather managed to come away with an entire 'diamond' section with adjoining sections and cross bracing spars which had already been chomped out by the demolition machine which resembled a huge mechanical dinosaur. Seeing this section close up, it became obvious how much bigger it was than when it was up in the roof and that it was going to overhang the entire trailer by quite a bit! The whole roof structure was held together by thousands of huge stubby looking nuts and bolts, the threads of which were very fine. These bolts had a diameter of approx. 2 1/4" inches and approx 3" inches long. There were about three dozen of these bolts in the bit we had salvaged, and we were just wondering how on earth we were going to transport this huge steel thing as we had no tools with us of this size to dis assemble it, when I discovered that all these bolts were in fact loose and the nuts could just be unscrewed by hand! Such was the quality of these fixings that none of them were seized up or even rusted, the only obstacle being to break the creamy coloured paint coating on some of them to undo them. It turns out through our research that luckily for us the fixings were never tightened when the roof was built in the 1930's, but purposely left loose to allow for a precise amount of expansion and contraction. So fortunately we were able to stack all the individual pressed sections neatly (which were about nine feet long and heavy) and which still filled the whole trailer. Incidentally, as we studied each individual section we began to appreciate the complexity of the design and the result of some very clever and precise design calculations. These must have been worked out by someone with a slide-rule and incredible engineering abilities, to allow for the gentle curvature of the roof span which was governed entirely by the subtle variation in the bolt hole positions and the angles of the pressed sections.
While we were there, amongst the rubble we stumbled upon the remains of where the hillside lift had been installed, in a large rectangular concrete hole in the ground which had been covered over with a steel girder structure and plating. This had been cut out for scrap revealing some of the original mechanism which had probably not seen the light of day in seventy years.
The roof section was re-assembled when we got it back to work where it was displayed in an exhibition about 'Shadow Factories' and what the car factories did towards the war effort in ww2. As far as I can recall, the roof section went out on loan to the British Motor Museum at Gaydon where I believe it may currently be in storage.
The site of the Flight Shed at Longbridge is now occupied by a housing estate with road names which only offer a clue as to it's aviation history. and I have since learned that the Supermarine factory building has also now gone, demolished in the name of progress. There were also some entrances to the factory's vast network of underground tunnels uncovered and which were all sealed off prior to the houses being built.
I have since learnt that the Supermarine factory building has also been demolished in the name of progress.
If anyone out there has any other interesting information on any of these buildings I would love to know.
Kind regards, Chris.
 
The roof construction of the ‘flight shed’ sounds like it was patent ‘Lamella’ roof, quite often seen in the construction of aircraft hangers. They were a good way of erecting a cost effective structure that covered a wide open space.
 
Hi there! I was always fascinated by the building known as the 'Flight Shed' at the lower end of Lowhill Lane. It seemed an unusual place to have what seemed to be a WW2 aircraft hangar, until I gradually began to uncover and understand the fascinating history of the factory and the part it played during the war years. I used to drive past it every day on my way to work and often used to go for walks and would purposely go and have a closer look at it through the railings. If one was to stand on the grass bank on the other side of the road in Cofton Park, you could get a good view of the inside of the geodexic roof structure through the windows that ran around the upper edge of the building. It looked a bit like the fuselage of a Wellington bomber but on a massive scale.
I was lucky enough to meet a chap at one of the Longbridge car rallies in Cofton Park who told me of a great web site called 'Austin Memories', which has been formed by a dedicated group of local historians keen to preserve and promote the rich history of the factory and the social history surrounding it. On the website. if you go onto the list at the side of the screen and click on 'Aircraft Production', then scroll down to the very end there is the most amazing piece of film showing the production of Hawker Hurricanes in the Flight Shed during WW2. Full airframe assembly is shown being carried out as well as the installation of Rolls Royce Merlin engines (by people who look as though they may have once lived in my street) and in the upper background the roof structure can clearly be seen. It then shows the completed aircraft being carried up onto the airfield via a lift type platform which ran on rails up the hillside at the rear of the building. The film ends with a Hurricane being flown out from the airfield with a clear view of a hill in the near distance with a clump of trees on the top (Frankley Beeches).
These were not the only aircraft built at the Longbridge factory. Across the road (Groveley Lane) from the flight shed was another less obvious aircraft hangar where Avro Lancaster fuselages were built and shipped out by road for final assembly elsewhere. Other aircraft built there was the Fairey Battle, and sub-assemblies for the De Haviland Mosquito. This building was later to be used for engine developement and gearbox production in the post war years, and I believe right up to the end of the factory's involvement with BMW, whereupon it was demolished to make way for housing.
One day as I drove past the flight shed, I noticed a sign attached to the railings saying that a demolition company was on sight with work having already begun. As I work in the motor vehicle heritage sector, I informed my work colleague who looked quite shocked. Being fully aware of it's historical significance he quickly got in touch with the demolition company and arranged for us to go and salvage a piece of the roof structure, as only two examples of this type of hangar roof survived in Britain at that time; Longbridge, and the old Supermarine factory at Southampton which was then occupied by Ford and where Transit vans were being produced.
We went with a Land-Rover and car trailer, and in very wet weather managed to come away with an entire 'diamond' section with adjoining sections and cross bracing spars which had already been chomped out by the demolition machine which resembled a huge mechanical dinosaur. Seeing this section close up, it became obvious how much bigger it was than when it was up in the roof and that it was going to overhang the entire trailer by quite a bit! The whole roof structure was held together by thousands of huge stubby looking nuts and bolts, the threads of which were very fine. These bolts had a diameter of approx. 2 1/4" inches and approx 3" inches long. There were about three dozen of these bolts in the bit we had salvaged, and we were just wondering how on earth we were going to transport this huge steel thing as we had no tools with us of this size to dis assemble it, when I discovered that all these bolts were in fact loose and the nuts could just be unscrewed by hand! Such was the quality of these fixings that none of them were seized up or even rusted, the only obstacle being to break the creamy coloured paint coating on some of them to undo them. It turns out through our research that luckily for us the fixings were never tightened when the roof was built in the 1930's, but purposely left loose to allow for a precise amount of expansion and contraction. So fortunately we were able to stack all the individual pressed sections neatly (which were about nine feet long and heavy) and which still filled the whole trailer. Incidentally, as we studied each individual section we began to appreciate the complexity of the design and the result of some very clever and precise design calculations. These must have been worked out by someone with a slide-rule and incredible engineering abilities, to allow for the gentle curvature of the roof span which was governed entirely by the subtle variation in the bolt hole positions and the angles of the pressed sections.
While we were there, amongst the rubble we stumbled upon the remains of where the hillside lift had been installed, in a large rectangular concrete hole in the ground which had been covered over with a steel girder structure and plating. This had been cut out for scrap revealing some of the original mechanism which had probably not seen the light of day in seventy years.
The roof section was re-assembled when we got it back to work where it was displayed in an exhibition about 'Shadow Factories' and what the car factories did towards the war effort in ww2. As far as I can recall, the roof section went out on loan to the British Motor Museum at Gaydon where I believe it may currently be in storage.
The site of the Flight Shed at Longbridge is now occupied by a housing estate with road names which only offer a clue as to it's aviation history. and I have since learned that the Supermarine factory building has also now gone, demolished in the name of progress. There were also some entrances to the factory's vast network of underground tunnels uncovered and which were all sealed off prior to the houses being built.
I have since learnt that the Supermarine factory building has also been demolished in the name of progress.
If anyone out there has any other interesting information on any of these buildings I would love to know.
Kind regards, Chris.
Great that you saved that bit of roof! - I used to often work as a sub-contractor in the Flight Shed in the 80s. I maintained the computers that were part of the Froude engine test cells. At that stage the interior of the shed was taken up with mezzanine floors, so you got little sense of its "aircraft hangar" heritage. Great bunch of blokes worked there in research and development, it was an entirely different environment to the toxic "them & us" atmosphere between workers and management you encountered on the assembly lines. A lot of the staff in the flight shed used to also work at the research establishment at Gaydon, which also had Froude test cells. So its very appropriate that the section of roof ended up there. As Mortum said, its roof was of ‘lamella’ design, rather ironically this type of roof was originally designed in Germany (where it is known as a "Zollinger" roof, after its inventor, Freidrich Zollinger). I think there were fears that its structure was deteriorating and might have collapsed if there was a build up of snow on it. The flight shed was built for the final preparation for flight of aircraft built over the road at the "Aero" East works. - This was initially Fairey Battles and then Hawker Hurricanes - hauled up the "ski-slope" to the small airfield on top of the hill. When the factory switched to producing Stirling bombers and Lancasters, they were too big for the Flight Shed and airfield, so the major assemblies were shipped over to Elmdon for final assembly there. It's a pity there isn't any big memorial to all that - something like the sculpture on "Spitfire Island" over at Castle Bromwich. I'm putting a link to that Video you talked about... Towards the end you can make out Frankley Beeches on the horizon when the Hurricane takes off.

 
Great that you saved that bit of roof! - I used to often work as a sub-contractor in the Flight Shed in the 80s. I maintained the computers that were part of the Froude engine test cells. At that stage the interior of the shed was taken up with mezzanine floors, so you got little sense of its "aircraft hangar" heritage. Great bunch of blokes worked there in research and development, it was an entirely different environment to the toxic "them & us" atmosphere between workers and management you encountered on the assembly lines. A lot of the staff in the flight shed used to also work at the research establishment at Gaydon, which also had Froude test cells. So its very appropriate that the section of roof ended up there. As Mortum said, its roof was of ‘lamella’ design, rather ironically this type of roof was originally designed in Germany (where it is known as a "Zollinger" roof, after its inventor, Freidrich Zollinger). I think there were fears that its structure was deteriorating and might have collapsed if there was a build up of snow on it. The flight shed was built for the final preparation for flight of aircraft built over the road at the "Aero" East works. - This was initially Fairey Battles and then Hawker Hurricanes - hauled up the "ski-slope" to the small airfield on top of the hill. When the factory switched to producing Stirling bombers and Lancasters, they were too big for the Flight Shed and airfield, so the major assemblies were shipped over to Elmdon for final assembly there. It's a pity there isn't any big memorial to all that - something like the sculpture on "Spitfire Island" over at Castle Bromwich. I'm putting a link to that Video you talked about... Towards the end you can make out Frankley Beeches on the horizon when the Hurricane takes off.

Hi, thanks for putting that link on so the film of Hurricanes being built in the Flight Shed can be viewed. A fabulous piece of film for anyone who's never seen it. I never get tired of watching it!
Incidentally, near the end of the film when the Hurricane is flying off the airfield, a barrage balloon can just be seen not too far away. This was anchored just behind where the blocks of flats are on the right hand side of the road approx. 3/4 the way up Ryde Park Road in Rednal. Years ago, I knew an old lady who had lived in the area since just before the war and used to play near the barrage balloon with her friends when that area was still an open field. She had lived in the same house for nearly all her life, her parents having bought the house new in 1938 when she was 5 years old.
Kind regards, Chris.
 
Hi there again! I just thought I'd share a funny story that I heard, about how people used to steal bits and pieces from the Longbridge factory. A friend of mine that worked there during the 1960's and 70's knew a chap who's job seemed to get him around the factory a bit, and which enabled him to be a habitual thief and would make it his mission to 'nick' something from work every day of the week without fail. It was no secret that many people were 'borrowing things' on a regular basis and there seemed to be a somewhat healthy trade existing in people being able to get certain things for mates in other parts of the factory who were in need of spare parts, tools or anything else that was not nailed down for that matter. For this chap, it went beyond getting things for other people and started off with pocketing small things like nuts and bolts, then wiper motors and then after it became clear that security was often less than slack he got a bit more confident and gradually progressed onto larger and larger items, on one occasion boasting that he had successfully liberated a whole differential assembly for an Austin Cambridge.
One day as he was walking out of the factory gates, he was seen to be wearing a large overcoat and given that he was a fairly skinny chap he appeared to have put on about four stone in weight over night! When they were clear of the factory he caught up with him and in amusement asked him what he had got today. He opened his coat to reveal two C-series cylinder head assemblies hanging from a rope round his neck. He said he had really only wanted one, but decided that to walk more convincingly, balancing things out with two would certainly be better. When asked who they were for, he said he didn't know yet, and they weren't for himself as he didn't even own a car and that he'd taken them just because they were there, and it seemed like a good idea at the time because there was no-one looking!
Goodness knows what else he'd got his eye on, but there's no wonder the place went down the pan along with the rest of the car industry and everyone with it!
Regards, Chris.
 
Not legend Keith, a guy from Bromsgrove built a complete MGB with parts nicked form the factory shipped up from Oxford on the company transport, it was only discovered when they caught a second MGB body on its way to him.
As a motor trader I was offered parts by my brother in law who worked at the body factory and his neighbour who worked at Longbridge, everything from spark plugs to headlamps were on offer and pretty well anything else you needed including spare wheels and tyres.
You just had to ask.
 
Ha ha...legend has it that someone built a complete car in their garage.....
Hi there! That reminds me of the song 'One piece at a time' by Johnny Cash, about a bloke who worked on the production line at GM's Cadillac factory. He spent all day assembling the cars he always aspired to owning but could never afford, so decided to build his own from parts he'd smuggled out the factory. Trouble was, it took him so long to achieve his goal that the models of cars had changed multiple times during his quest, and the result was a car made up of parts none of which fitted or matched from one side to the other, or front to back. There is a picture of a Cadillac that someone made in the same fashion, and which was gifted to Johnny Cash in tribute to the song!
Regards, Chris.
 
Not legend Keith, a guy from Bromsgrove built a complete MGB with parts nicked form the factory shipped up from Oxford on the company transport, it was only discovered when they caught a second MGB body on its way to him.
As a motor trader I was offered parts by my brother in law who worked at the body factory and his neighbour who worked at Longbridge, everything from spark plugs to headlamps were on offer and pretty well anything else you needed including spare wheels and tyres.
You just had to ask.
Hi Eric! The same friend who told me about the cylinder heads under the overcoat story used to work in a section of the factory where prototype interiors were made for styling and evaluation purposes. They were sometimes tasked with putting together the overall exterior appearance and interior package of emergency vehicles including all the additional functional items such as sirens, radios, phones, lighting, graphics etc. On one such occasion they had a plain white Rover delivered to them (don't know which model) for them to carry out the conversion to the new style of motorway pursuit car for evaluation and approval by the police. They had it in their workshop for the required period after which the police were invited to come and have a look. On that morning they parked the car outside their building while they got on with other things. By the time the representatives from the police turned up the car had vanished! Bearing in mind their workshop was at the time well within the factory perimeter, nobody saw it go and it was never seen again. There was an inquiry into it's disappearance which turned up nothing. The only thing people kept saying was even if they had seen it leave, who would ever stop a police car? (!)
Regards, Chris.
 
There are some good views of the interior of the Longbridge CAB buildings and offices in this film on quality control. Naming the well-known actors in it is quite a game!.

 
Last edited:
In the 1960s/70s if you did someone a favour and they worked at Longbridge they often repayed you with a set of spark plugs, they were like a form of legal tender, apparently very easy to get if you worked there.
 
There are some good views of the interior of the Longbridge CAB buildings and offices in this film on quality control. Naming the well-known actors in it is quite a game!.

That's brilliant! I've never seen that before. It's got all the un-PC qualities expected of the era, and funny but with a serious moral to the story.
Regards, Chris.
 
  • Appreciate
Reactions: cba
Hi there! I've been reminded of a conversation I had some years ago with a fellow classic car club member who told me about something that had happened when he applied to rent a lock-up garage in the late 1970's, and the story is to do with the Longbridge factory.
The garage in question was one of about twenty council garages in a block about fifty yards down the road from his house in the Warstock area of Birmingham. He paid the rent and the council sent him the keys, so he went to have a look and to sweep it out ready to put his car in it. When he lifted the door he saw there was a car still in it so feeling like he was trespassing he closed it again and went home to phone the council to tell them there had possibly been a mix-up. No, there had been no mistake he was told, and according to there records the allocated garage was empty and had been for quite some time. So he went back to have another look thinking he may be able to find out who's car it was. When he looked at the car again in more detail, he noticed that the bright orange Austin Allegro 1750 was in exceptionally good condition, albeit covered in dust with half flat tyres and with the number plates missing. It was when he looked through the windscreen that he saw what appeared to be a dispatch notice and various labels stuck inside the screen and with polythene still on the seats and the keys still in the ignition. As the council weren't interested, he thought it was his duty to report the finding to the police as things did not appear to be quite right. When he described the car over the phone, the desk sargent said if it was the car he thought it was they had been looking for it about two and a half years ago but the trail had gone cold.
The story was that someone had walked into the Longbridge factory one morning posing as one of the people who's job it was to drive the finished cars off the production line and park them up ready for despatch. This person had driven the car out of the factory and was last seen driving away up the Bristol Road towards Northfield, the only person to have challenged him in any way was the man on the gates who was told by the driver that it was being taken to 'have rectification work done'. The gate man waved him out onto the road and that was that, until it was noticed some time later that there was a car unaccounted for!
The police came out to have a look and confirmed it was the missing car, and they retuned later to transport it away. Telling his neighbour of the incident, he said "You must have been mad to tell the police. You should have swapped the number plates and the VIN plate for ones taken from an Allegro in the local scrapyard and then you could have registered it and had a new car for free and no-one would ever have known!"
He said he was surprised that his neighbour who he'd known for many years thought he was a fool, and seemed to be as criminally minded as the thief that stole the car, and because of his own blind sense of honesty the thought of doing such a thing had never even entered his head!
Regards, Chris.
 
Back
Top