• Welcome to this forum . We are a worldwide group with a common interest in Birmingham and its history. While here, please follow a few simple rules. We ask that you respect other members, thank those who have helped you and please keep your contributions on-topic with the thread.

    We do hope you enjoy your visit. BHF Admin Team

Renovating Stairs

AMW

master brummie
Hi

I would love to renovate these stairs in some way rather than hide them with carpet as they have been until now. I notice some of the stairs are cracked, they also creak in places. Would anyone be able to advise please.

Best wishes
Alison

thumbnail_20240826_115339.jpgthumbnail_20240826_115315.jpgthumbnail_20240826_115310.jpgthumbnail_20240826_115305.jpgthumbnail_20240826_115248.jpg
 
i am no expert but you made need a carpenter in to sort out those cracks..you made need some treads replacing..good luck

lyn
 
  • Appreciate
Reactions: AMW
im a joiner
old creaking stairs is a part of there character what
im looking at are photos of what we call the rise and go
depends if you are going to paint them or carpet them if you carpet them with a thick under lay that will reduce the creaking you hear as long as you have no dry rot or worm you don t have a safety issue
it is hard to see any
problems by looking at photos
 
Last edited:
  • Appreciate
Reactions: AMW
im a joiner
old creaking stairs is a part of there character want im looking at are photos of what we call the risr and go
depends if you are going to paint them or carpet them if you carpet them with a thick under lay that will reduce the creaking you hear as long as you have no dry rot or worm you don t have a safety issue
it is hard to see any
problems by looking at photos
Hello Donbogen

If I remember rightly you gave me that lovely comment on restoring my wooden kitchen worktops, thank you :)

I don't mind the creaking, as you say it is part of their character. I removed the carpet and carpet strips and this is what I am left with. Ideally I would like to return them to oiled/stained solid wood. With the stairs I have concerns about safety I guess.

Picture 1 shows the cracks in the riser on the second step, and the second step moves up and down when trod on due to the bit missing between the second and third step on the left hand side.

Picture 2 shows the cracks in the overhang of the treads.

Picture 3 shows another crack across the riser.

Picture 4 & 5 shows the cracks across the treads.

I'm not sure if these are dangerous or could I repair them in any way?

I really enjoyed the kitchen worktop project and wondered if I could apply what I learnt to the stairs.

Also could I ask what face protection I should be using for these sorts of jobs please, and would you know how to get rid of black 1930's varnish from skirting boards?

Sorry to ask you so may questions.

Best wishes
Alison
 
Hi Alison
about the cracks can you access under the stairs so you can see the wedges if any
like i said if theres no rot or worm that be good news
if theres only slight movement with the go and you what to stop movement you could fix a piece of timber to the underside of the go thats if you can access it that crack has more then likely been there for many years
if you are sanding or striping its best to wear a mask and eye protection
Regards
Don
 
  • Appreciate
Reactions: AMW
Steps 2 and 3 seem to have the most problems. When the stair is stepped on the crack seems to open up and the crack/gap comes apart. I'm not sure if this is repairable in anyway or the whole tread needs to be replaced. There doesn't appear to be any woodworm and the rest of the stairs are in good shape. I do have access to the underneath of the staircase.

thumbnail_20240826_152208.jpgthumbnail_20240826_151918.jpgthumbnail_20240826_152005.jpgthumbnail_20240826_151813.jpgthumbnail_20240826_152238.jpgthumbnail_20240826_115339.jpg
 
Yes maybe that tread needs replacing can be a bit tricky as it is housed into the string on both sides
but like i said it could be strengthed by fitting timber section under the tread supported 2"x1" bearers fitted to the string
using wood glue as well i do say your best bet is to do the repair under the tread as it will be invisible
 
Yes maybe that tread needs replacing can be a bit tricky as it is housed into the string on both sides
but like i said it could be strengthed by fitting timber section under the tread supported 2"x1" bearers fitted to the string
using wood glue as well i do say your best bet is to do the repair under the tread as it will be invisible
That should be a good plan. Make sure the 1” dimension is to the stair tread and the 2” dimension down. If you can get 21/2” that would be a little stiffer. Make sure you keep good pressure on the stiffener until the wood glue dries.
My personal preference would be to strip the treads and apply a couple of coats of polyurethane stain. We did that 8n a couple of houses, it always looked good and withstood many many small feet running up and down!
Good luck….
 
Hi the tread I want to get at appears to be boxed in somehow.
 

Attachments

  • Stair 20240829_092827.jpg
    Stair 20240829_092827.jpg
    399.1 KB · Views: 13
  • Stair 20240829_092803.jpg
    Stair 20240829_092803.jpg
    697.1 KB · Views: 13
  • Stair 20240829_092753.jpg
    Stair 20240829_092753.jpg
    418.7 KB · Views: 13
  • Stair 20240829_092748.jpg
    Stair 20240829_092748.jpg
    451.7 KB · Views: 13
Hi the tread I want to get at appears to be boxed in somehow.
Zooming on my iPad, it does not look like the boards (boxing is structural) as the boards on the horizontal sections are nailed on top of the stairs (bottom). I would take one board off in the area you need and see how it looks. Difficult to see from a photo. If this is too difficult for you, you might want to get a contractor to do this part.
 
Zooming on my iPad, it does not look like the boards (boxing is structural) as the boards on the horizontal sections are nailed on top of the stairs (bottom). I would take one board off in the area you need and see how it looks. Difficult to see from a photo. If this is too difficult for you, you might want to get a contractor to do this part.
Remove the boards taking care as you do so
i advise you get someone to repair tread in question its not a big job well not to me anyway maybe just over a hours work
im making a flight of new stairs for a hotel at the moment
its sad but i have kept count of how many stair i have made and fitted it stands at about 30 + as i sign them and date them as with all my work
these may be the last stair case i do
Let me know how you get on
 
Remove the boards taking care as you do so
i advise you get someone to repair tread in question its not a big job well not to me anyway maybe just over a hours work
im making a flight of new stairs for a hotel at the moment
its sad but i have kept count of how many stair i have made and fitted it stands at about 30 + as i sign them and date them as with all my work
these may be the last stair case i do
Let me know how you get on
Excellent advise!
 
This crack on the 4th step down corresponds with the crack in the wood just by the light bulb in the understairs cupboard.
1724952859746.png1724952924640.png
 
This means that steps 1, 2 and 3 are under the tongue and groove in the cupboard.
1724953707178.png

1724953791629.png
1724953926039.jpeg


The tongue and groove seem to have nails or broken off screw heads embedded to secure it.
 
Thanks for your replies Richard and Don.

I guess if I had a look at it I would have to prise open the wood to start with somehow?? then work out what I needed to do. This part may have to wait awhile till I can afford to get someone to take a look. In the mean time I will carry on paint stripping the stairs which is hard work but satisfying.

Don... how marvellous dating and signing your work for people to find in the future. You must be incredibly skilful making flights of stairs for hotels! Hope you take a photo of them too. I was just thinking about the genealogical aspect of signing them too and a family relative finding them... the thought is amazing!
 
Ok
Thanks for your comments ref me signing completed work
im sure if you can fix a timber section to the underneath of the tread using glue and screw the timber to under side of the tread and the riser if needed also you can metal angle brackets to the riser and the tread underneath the crack on upper surfaces will remain but thats part of the character let me know how you get on
 
It looks like from the photos you will need to remove two pieces of wood in the under-stair cupboard. Following Dons lead I would also try to get a couple of long screws into the riser which has a split which needs closing. Then stiffen the tread. The riser first then the tread.
Good luck with the paint stripping, be careful in case there is any lead based paint. You don’t want to be inhaling any of that stuff!
 
Thanks Richard for your advice, and thanks for your help regarding the kitchen work surfaces too. I really didn't have a clue where to start with that project. I really appreciate both yours and Dons help. Which two pieces of wood do you think I need to remove please?
Thanks for the hint about lead based paint. I think there probably is. I have bought disposable PP2 masks. I don't really know where to store the mask when I have a cuppa or lunch.

Also the banister has a curved shape to it and I am not sure how to remove the varnish.
 
Not sure what 2 pieces of wood you mean as i said the the tread is housed into the string the tread is also housed into the base of the riser i do not recommend any removing of treads yes i could do it
please just reinforce from underneath as i said
regarding handrail curve paint stripper with wire wool or gloves you need to don mask and goggles
idont have time at moment but in a few days i can send you a drawing how to do the repair made simple
 
Not sure what 2 pieces of wood you mean as i said the the tread is housed into the string the tread is also housed into the base of the riser i do not recommend any removing of treads yes i could do it
please just reinforce from underneath as i said
regarding handrail curve paint stripper with wire wool or gloves you need to don mask and goggles
idont have time at moment but in a few days i can send you a drawing how to do the repair made simple
Don, I think the pieces of wood are those under the stairs so that the underside of the stairs can be seen. I would take the one right above the light bulb being careful and the look at what access you have an other board to remove. Difficult from a photo. Follow Dons directions on the paint striping, There is a rectangular tool sold in the US and I am sure there that helps you get in the nooks and crannies that I would recommend.
 
Hi Alison, As far as stripping the paint off, whether by paint stripper or burning it off you will need a good scraper. I have just looked on line at B&Q and they have a great variety. You will need one where you can get into the corners easily. There is a 100mm steel floor scraper at £4.99 but there are some carbide edged ones which will last much longer. but of course are dearer. If ou can get to a B&Q store there is always someone there to give advice
 
  • Appreciate
Reactions: AMW
Thank you. I got a general purpose scraper from Toolstation which is good, but the Hyde scraper would be great for the banister. I'm not using a heat gun or paint stripper. Really appreciate your help and suggestions.
 
Thank you. I got a general purpose scraper from Toolstation which is good, but the Hyde scraper would be great for the banister. I'm not using a heat gun or paint stripper. Really appreciate your help and suggestions.
Good luck! There are some environmentally friendly liquid strippers available if you need them.
 
  • Appreciate
Reactions: AMW
Back
Top