• Welcome to this forum . We are a worldwide group with a common interest in Birmingham and its history. While here, please follow a few simple rules. We ask that you respect other members, thank those who have helped you and please keep your contributions on-topic with the thread.

    We do hope you enjoy your visit. BHF Admin Team

Gaskell and Chambers

  • Thread starter Thread starter O.C.
  • Start date Start date
I have a Kelly's Directory for 1973/4, they were still in business then, as bar fitters, at Warwick St. (Don't know where that is!).
My husband has a similar pub stool in the "shed", I will try to have a look at it! I think it was his Dad's too.
rosie.
 
Hi there,
As far as I know the G&C building was taken over by Aston University in the 70's and was their Electrical Engineering Department building known as the Sumpner Building, this has now been demolished as part of the ongoing campus redevelopment.
 
Hi Ray
you are quite correct to say that GC Was in Consstution street which they was most indeed
and prior to that before the war years they occupied a very large building on the corner of bordesly street
and along the new cannal street digbeth and its the Asian cash and carry i think they call it A S wholsalers today
this is before the war years whn they got bombed Astonian ,,, Alan,,,
 
Gaskell & Chambers interest me as they originally took over the premises of the Yates family who had occupied 37-43 Coleshill Street from as early as the early 1800’s. The patriarch of the family Thomas Yates was a die sinker from around 1788. His grandsons included the Mayor of Birmingham Edwin Yates, and the others boys were primarily pewterers. Thomas junior made spoons and whistles, and James specialised in Bar fitting equipment, beer machines. This was acquired by William Perks of Dale End in the late 19th century, and eventually the whole complex fell into the hand of Gaskell & Chambers.
 
Looking at all these reports, there is little mention of the word beer engine. The mechanism for the hand pull, so much a feature of the real ale public house, was called a beer engine, or liquor engine, depending on the alcohol dispensed.

Gaskell moved their premises to Drayton Road in Shirley, has any body any memories of that works
 
Hi can anyone shed any light on the origins of Gaskell & Chambers? My gerat, great uncle, Sir Cornelius Chambers, was Chairman of G&C in the early 20th century. I have evidence of him as a clerk in 1891, but assume that the company existed prior to Cornelius, and how he came to be chairman. And who was Gaskell? I have made enquiries to the modern day company but they don't appear to have any historical records.
Any information anyone can pass on would be greatly appreciated!
He's my Great Great Uncle, too! On my mother's side. Sir Cornelius married my granny's (my mum's mother's) aunt. Don't know much: my mum (who died in 2000) told me 'Uncle Corny' was knighted for services to industry, and, I seem to remember, he lost money in South African (diamond?) mines (which flooded), or some such venture. He helped my granny by setting her up with an off-licence when she fell on hard times. But I'd like to know more... Steve Jones
 
I worked for Gaskell and Chambers (southern) from 1961-1969 first as a Joiner then as a Joinery Setter-Out,We had a Pewtering dept, we used to strip Pewter sub-tops and sinks fit stainless steel ones and cover the tops with Formica.Used to work with some of the Lads from Brum ,They came down when we could not cope with the workload.I see real pigs-ears of Bars these days.
 
I list the Birmingham makers in Workshop for the World, chapter 9- they include Yates and Birch and Samuel Mason.

There was a chapter prepared for the Breweries, but because of space had to be left out for another time!
 
When we used to frequent the Great Dorset Steam Fair in the early 2000's one year found a single G&C beer engine assembly, looking essentially like the drawing in post #69 above, with a couple of similar looking looking pumps, one is G&C plated, the other isn't, on one of the stands within the 'autojumble' area. I eventually managed to get it all at a very decent price towards the end of the show when the vendor was just desperate to get rid of it to save taking home. Fascinating equipment, so well made. Used one as a water lifter pump for a few years on a small allotment to save using tap water.
 
When we used to frequent the Great Dorset Steam Fair in the early 2000's one year found a single G&C beer engine assembly, looking essentially like the drawing in post #69 above, with a couple of similar looking looking pumps, one is G&C plated, the other isn't, on one of the stands within the 'autojumble' area. I eventually managed to get it all at a very decent price towards the end of the show when the vendor was just desperate to get rid of it to save taking home. Fascinating equipment, so well made. Used one as a water lifter pump for a few years on a small allotment to save using tap water.
Welcome to the Forum Sprayerman! A great place with wonderful folks and information, enjoy!
 
My husband had Gaskell & Chambers OPTIC PEARL 6 stamped 566565 - I have no idea where/when he acquired or anything about it. Can anyone tell me 1) the significance of the numbers 566565 2) the likely date of manufacture 3) to what does the number 6 relate?
Any info gratefully received Judith54


Post moved to main G & C thread
 
Last edited by a moderator:
They are Liquor dispensers for bars. Pearl optics have a circular glass viewer and seem to come in a variety of forms so the number could either be a patent or model number.
 
Back
Top