• Welcome to this forum . We are a worldwide group with a common interest in Birmingham and its history. While here, please follow a few simple rules. We ask that you respect other members, thank those who have helped you and please keep your contributions on-topic with the thread.

    We do hope you enjoy your visit. BHF Admin Team

Gaskell and Chambers

  • Thread starter Thread starter O.C.
  • Start date Start date
I have a Kelly's Directory for 1973/4, they were still in business then, as bar fitters, at Warwick St. (Don't know where that is!).
My husband has a similar pub stool in the "shed", I will try to have a look at it! I think it was his Dad's too.
rosie.
 
Hi there,
As far as I know the G&C building was taken over by Aston University in the 70's and was their Electrical Engineering Department building known as the Sumpner Building, this has now been demolished as part of the ongoing campus redevelopment.
 
Hi Ray
you are quite correct to say that GC Was in Consstution street which they was most indeed
and prior to that before the war years they occupied a very large building on the corner of bordesly street
and along the new cannal street digbeth and its the Asian cash and carry i think they call it A S wholsalers today
this is before the war years whn they got bombed Astonian ,,, Alan,,,
 
Gaskell & Chambers interest me as they originally took over the premises of the Yates family who had occupied 37-43 Coleshill Street from as early as the early 1800’s. The patriarch of the family Thomas Yates was a die sinker from around 1788. His grandsons included the Mayor of Birmingham Edwin Yates, and the others boys were primarily pewterers. Thomas junior made spoons and whistles, and James specialised in Bar fitting equipment, beer machines. This was acquired by William Perks of Dale End in the late 19th century, and eventually the whole complex fell into the hand of Gaskell & Chambers.
 
Looking at all these reports, there is little mention of the word beer engine. The mechanism for the hand pull, so much a feature of the real ale public house, was called a beer engine, or liquor engine, depending on the alcohol dispensed.

Gaskell moved their premises to Drayton Road in Shirley, has any body any memories of that works
 
Froggy_Jo said:
Hi can anyone shed any light on the origins of Gaskell & Chambers? My gerat, great uncle, Sir Cornelius Chambers, was Chairman of G&C in the early 20th century. I have evidence of him as a clerk in 1891, but assume that the company existed prior to Cornelius, and how he came to be chairman. And who was Gaskell? I have made enquiries to the modern day company but they don't appear to have any historical records.
Any information anyone can pass on would be greatly appreciated!
Click to expand...
He's my Great Great Uncle, too! On my mother's side. Sir Cornelius married my granny's (my mum's mother's) aunt. Don't know much: my mum (who died in 2000) told me 'Uncle Corny' was knighted for services to industry, and, I seem to remember, he lost money in South African (diamond?) mines (which flooded), or some such venture. He helped my granny by setting her up with an off-licence when she fell on hard times. But I'd like to know more... Steve Jones
 
I worked for Gaskell and Chambers (southern) from 1961-1969 first as a Joiner then as a Joinery Setter-Out,We had a Pewtering dept, we used to strip Pewter sub-tops and sinks fit stainless steel ones and cover the tops with Formica.Used to work with some of the Lads from Brum ,They came down when we could not cope with the workload.I see real pigs-ears of Bars these days.
 
I list the Birmingham makers in Workshop for the World, chapter 9- they include Yates and Birch and Samuel Mason.

There was a chapter prepared for the Breweries, but because of space had to be left out for another time!
 
When we used to frequent the Great Dorset Steam Fair in the early 2000's one year found a single G&C beer engine assembly, looking essentially like the drawing in post #69 above, with a couple of similar looking looking pumps, one is G&C plated, the other isn't, on one of the stands within the 'autojumble' area. I eventually managed to get it all at a very decent price towards the end of the show when the vendor was just desperate to get rid of it to save taking home. Fascinating equipment, so well made. Used one as a water lifter pump for a few years on a small allotment to save using tap water.
 
Sprayerman said:
When we used to frequent the Great Dorset Steam Fair in the early 2000's one year found a single G&C beer engine assembly, looking essentially like the drawing in post #69 above, with a couple of similar looking looking pumps, one is G&C plated, the other isn't, on one of the stands within the 'autojumble' area. I eventually managed to get it all at a very decent price towards the end of the show when the vendor was just desperate to get rid of it to save taking home. Fascinating equipment, so well made. Used one as a water lifter pump for a few years on a small allotment to save using tap water.
Click to expand...
Welcome to the Forum Sprayerman! A great place with wonderful folks and information, enjoy!
 
My husband had Gaskell & Chambers OPTIC PEARL 6 stamped 566565 - I have no idea where/when he acquired or anything about it. Can anyone tell me 1) the significance of the numbers 566565 2) the likely date of manufacture 3) to what does the number 6 relate?
Any info gratefully received Judith54


Post moved to main G & C thread
 
Last edited by a moderator:
They are Liquor dispensers for bars. Pearl optics have a circular glass viewer and seem to come in a variety of forms so the number could either be a patent or model number.
 
Hey everyone!

My family has this Gaskell & Chambers Dalex inlaid table. It has some water damage and we want to restore or replace the inlay, but am having trouble identifying the material.

Some antique websites say the material is Dalex, but from what I can tell, Dalex is just the branding of items that originally were made at the Dalex Works in Birmingham.

Any idea where to look? I have this page from an old catalogue, but don't know where I'd find the registration to find the details on the material (my early guess was bakelite, but it fails all of the tests)
1000023943.jpg1000023945.jpg1000023915.png
 
Hewgo_Weaving said:
Hey everyone!

My family has this Gaskell & Chambers Dalex inlaid table. It has some water damage and we want to restore or replace the inlay, but am having trouble identifying the material.

Some antique websites say the material is Dalex, but from what I can tell, Dalex is just the branding of items that originally were made at the Dalex Works in Birmingham.

Any idea where to look? I have this page from an old catalogue, but don't know where I'd find the registration to find the details on the material (my early guess was bakelite, but it fails all of the tests)
View attachment 196882View attachment 196883View attachment 196884
Click to expand...
Hi and welcome.

That’s a nice table but Dalex is a new one to me. I am wondering if Dalex is a brand name for bar equipment and not a material.

It did also cross my mind that it may be a type of Formica composite type material.

Is it hard or soft, or like plastic or rubber?

If it were me, I would try least intrusive first. Try cleaning with some mild soap and water, testing a small area first. I am thinking if it is water damage or something else like heat that’s marked it. I would be surprised if it is water damage on a bar room table, they had to withstand beers, wine and spirits
 
Morturn said:
Hi and welcome.

That’s a nice table but Dalex is a new one to me. I am wondering if Dalex is a brand name for bar equipment and not a material.

It did also cross my mind that it may be a type of Formica composite type material.

Is it hard or soft, or like plastic or rubber?

If it were me, I would try least intrusive first. Try cleaning with some mild soap and water, testing a small area first. I am thinking if it is water damage or something else like heat that’s marked it. I would be surprised if it is water damage on a bar room table, they had to withstand beers, wine and spirits
Click to expand...
Thanks!

Yeah, Dalex comes from several different G&C products that were registered originally at the Dale End Works in Birmingham, doesn't seem to be a material (despite what quick searches would claim). I know for a fact that the main hint was that the "Dalex" Beer Engine from G&C didn't have any of the same material.

It kind of feels like a plastic. It's hard, and dents. It's a dark blue that turns a bit more saturated with a water cleaning. The big spot is water damage, and seems to have seeped in.

I'm honestly thinking that the inlay, whatever material, might be painted. But I really would love an expert to swoop in and save me.
 
You must log in or register to reply here.
Back
Top