• Welcome to this forum . We are a worldwide group with a common interest in Birmingham and its history. While here, please follow a few simple rules. We ask that you respect other members, thank those who have helped you and please keep your contributions on-topic with the thread.

    We do hope you enjoy your visit. BHF Admin Team
  • HI folks the server that hosts the site completely died including the Hdd's and backups.
    Luckily i create an offsite backup once a week! this has now been restored so we have lost a few days posts.
    im still fixing things at the moment so bear with me and im still working on all images 90% are fine the others im working on now
    we are now using a backup solution

Tucker Eyelets

Good afternoon can anyone help please

my father worked at tuckers possibly from late 1940 until 1968 at that point he would have been in his 50's
he worked as a tool room hardener and what I want to know is this
A) what the job entailed ?
B) what the hours was/ shift patterns/ wk end working?
C) what the salary was/ did it depend on length of time worked at company?
are old employee's any staff still around whom I could have a chat with on this
I am not looking for anything else but answers to the above please
kind regards
:)
 
Hello can anyone advise i am looking for answers to the questions below only
father worked as a tool room hardener at tucker eyelets from 1940s until 1968 , i would like to know
A) what the job actually entailed
B) hours of daily working / was it shift patterns / wk end working
C) what salary would he have been on/ did it depend on length of time worked at company/age/expertise
is there anyone around who worked at the company at that time/ photos that i could look at her catch up with
Regards:)
 
Hope someone can help - my father was at Tuckers during that time and would have known but he passed away in 2014.
 
Hello can anyone advise i am looking for answers to the questions below only
father worked as a tool room hardener at tucker eyelets from 1940s until 1968 , i would like to know
A) what the job actually entailed
B) hours of daily working / was it shift patterns / wk end working
C) what salary would he have been on/ did it depend on length of time worked at company/age/expertise
is there anyone around who worked at the company at that time/ photos that i could look at her catch up with
Regards:)
I know of two people who may be able to help you. One is John Murray, he was a Foreman in the Tool Room and is referred to in "Gina's" post elsewhere on this site. 12- months ago she mentions still visiting him. The other is Eric Drinkwater who was the Chief AEEU Convenor in the Toolroom. He is currently a Councillor on Burntwood Council (Staffordshire) and his contact details are on that site and therefore in the public domain.
 
First of all. Thanks for letting me join your group. I live in Attica, Ks in the US. Yesterday, I went to an auction and bought something I had never seen before, that I thought was cool as hell, and I had to have it. A little backstory about me. I was in the Military from 1980 - 1988, as an Aircraft Mechanic. Airframe Structural Repairman/Utility Helicopter Repairman, that carried over to my civilian life. I have worked for all of the Major Aircraft Companies but BOEING. I have worked for Bell Helicopter building the V22 Osprey, Textron/Airlands ScorpionJet, and every Jet that Beechcraft made. To include the Hawker 800. Which the fuselages are still made by wooden jigs in England the last time I knew. I have built test articles for NASA's Wind Tunnel for the Premier1, Hawker 800, and the Horizon by Beechcraft. But when I came across this beauty at the auction yesterday, I knew I had to have it, and I got it for $30 US Dollars. It is a/an Geo. Tucker Eyelet Co. Ltd Pnuematic Rivet Gun, with case, and rivet heads. Made at Birmingham 22 England. I tried to download pictures, but the files are too large, and I am not a computer geek, to know how to reduce the size of the pics for everyone to see. Just know that when I got home, I put an air fitting on the end of it, hooked up the air, pulled the trigger, and it worked beautifully. Out of curiousity, I tried to look it up on the internet to see if I could find out anything about it. Like what year it was made. Because it looks very old. That is how I came across this group. The Serial # is F/9732 and Patent #UK 793365. If anyone could tell me more about this amazing piece of equpment, I would appreciate it. Thank you.

https://m.facebook.com/story.php?story_fbid=115425042791288&id=100029713792073
 
Last edited:
Yesterday at an auction. I bought a Geo. Tucker Co. Ltd Pnuematic Rivet Gun. I paid $30 US. As I live in the States. Got it home, hooked up the air, and it worked like it should. Came with the case, and heads. Data plate says made in Birminham 22 England. Serial # F/9732. It is very old, and still beautiful. I will post pics to this thread when I get to a computer, as they are too large to attach from my phone.
https://m.facebook.com/story.php?story_fbid=115425042791288&id=100029713792073
 
Last edited:
I just use my Facebook membership as a login device for other sites when I have forgotten my username/password!

Maurice
 
I get message that page not available, and I may not have permission to view.
It is a link to my FB page. So it might not be viewable since we are not friends there. Was busy over the weekend. Will try and fix it later when I get home from work. Sorry.
 
I know of two people who may be able to help you. One is John Murray, he was a Foreman in the Tool Room and is referred to in "Gina's" post elsewhere on this site. 12- months ago she mentions still visiting him. The other is Eric Drinkwater who was the Chief AEEU Convenor in the Toolroom. He is currently a Councillor on Burntwood Council (Staffordshire) and his contact details are on that site and therefore in the public domain.
 
My dad Bill While worked at Tucker's 1958 - 1992, and yes, I am still in touch with his foreman, John Murray, and also a chap called Graham Curley. Graham is on facebook, John has an email but he is off to Thailand soon for the winter. Send me your contact details if you want them to get in touch.
 
Hello can anyone advise i am looking for answers to the questions below only
father worked as a tool room hardener at tucker eyelets from 1940s until 1968 , i would like to know
A) what the job actually entailed
B) hours of daily working / was it shift patterns / wk end working
C) what salary would he have been on/ did it depend on length of time worked at company/age/expertise
is there anyone around who worked at the company at that time/ photos that i could look at her catch up with
Regards:)
 
See my earlier reply. Dad never spoke at home of his life in Tucker's. I know he worked 7.30 - 4.30 Monday to Friday. I don't think Tucker's had shifts, evenings or Saturdays. You can see some nice photos of tucker's when it was closed on a site called 28 Days Later, google it.
 
Re: Tucker Eyelets / Emhart Technologies



mort do you know which section your dad worked in....last year after the factory had closed and was almost ready for demo some old photos were found stuffed in a cabinet to be skipped...these photos have not have not been on the net before..many photos show tucker eyelets walsall road being built in 1938 (later to be called tucker fasteners)...workers group photos taken in 1939 and some of the 1947 floods when the whole of walsall road was under water and a couple of inside shots oh and a group photo of tuckers home guard men in their uniform..the photos have been passed onto me...

lyn
Hi I would be very interested in the Home Guard photo as my husbands Dad, George Willis, was a Home Guard at Tuckers.
 
hi mowhawk
many thanks for the true as light memory of tuckers
i say true as light as it was very light work indeed and it was a pleasant
yet noisy place to work in ,
my 2nd eldest brother and my self both worked there in 1964 , i was
one of the machine minders whom worked there amongst thousand
workers there was machine shops ,after machine shops with all different
types of machines running, milling machines .capston machines,
it was a very noisy envoironment to work in
and very repitious, i had a row of about twenty five machines
all in one line ,andi had to keep walking up and down the line
for eight hours a day feeding these machines with little rivets in
buckets loads from the top of the machine and they would fall through
into a tray and then i would pull it out and drop them into drums
where a labourer would come along and take them to the inspection
department where my brother with other guys woulld use a micromita
and gauges to see if they pass , [ i should say my department was the
eyelets section ,and not the zipper dept ,]
my section of my machines of twenty five was directly behind
the ground floor third window you see on the photograph of there
building you have posted we had to wear ear muffs all day long
there was a great work team of people whom worked there it was one
big happy family we worked there for years our billy and myself
i have to say the people whom started working there in there
early days was dying about every couple of months
it got to a stage where nearly every couple of fridays the funeral cars
would stop out side them windows for two mins with an ex employee
whom was working there we would be told to stop our machines
by the management to mark our respect some of us stood by our
windows and some with the management go and stand out side
the factory it was a good firm to work for even thou the work was very
repetitious, sweatie and hard going on your feet walking back and
forwards all for eight hours solid be fore going to the loo you had
to get some one to releive you thou,s machine was never aloud
to run out or stop for any reason
me and our kid had good memories of george tuckers
and i had only one bad memory which i have not forgotten
and i will never will .
and that was the planning of a methord to do our foot ball coupon
the treble chance on littlewoods pools
to cut this story short i devised a way to select my numbers
and during those years atv was around them days and each week
on wednesday evening if there was a jack pot pay out
atv , would always interview the out right winner and asked
them how did they select there winning numbers
on that very wednesday evening billy and me never worked over
and always eating out meal . [ tea ] and the winner came on
as usal they asked him what methord did he use to select
the numbers , he was a scotman from scotland
that particular week there was eight teams playing through out
the foot ball coupon on that saturday and i also done that but
never handed my coupon to the agent bill gave his in but i never
so thats why i can never forget old george tuckers of
walsall rd perry barr and this was 1964 ,
once again thanks for the pic and the memory ,
have a nice day everybody astonian ,;;;;
my brother was a machine minder there too bless him
 
Hi I would be very interested in the Home Guard photo as my husbands Dad, George Willis, was a Home Guard at Tuckers.
Hi,
In 2017 I put this pic in the Home Guard thread but I'm not sure where I got it from ... would have to check.
Click to expand or click the 'up-arrow' to go to the other thread.
oldmohawk
Tucker Eyelets Home Guard.
index.php
 
Hi,
In 2017 I put this pic in the Home Guard thread but I'm not sure where I got it from ... would have to check.
Click to expand or click the 'up-arrow' to go to the other thread.
oldmohawk
Thank you , not sure if he is on this photo as its a long time ago but it is very interesting for my husband to see.
 
Hi anyone with information about tucker fasteners football club say 1940s onwards again this is pertaining the chap in the overcoat standing 9n the right of the picture
 

Attachments

  • Screenshot_20201107_170820.png
    Screenshot_20201107_170820.png
    342.5 KB · Views: 31
Hi all,
This is about my dad who was working at tucker eyeletts back in the 60s
As a tool room hardener he was happy chap well before the war anyways, a
Short chap , in his late forties, rode a motorcycle.
It appears that a member here called I think astonia ? Worked there in 1964
 
Back
Top