• Welcome to this forum . We are a worldwide group with a common interest in Birmingham and its history. While here, please follow a few simple rules. We ask that you respect other members, thank those who have helped you and please keep your contributions on-topic with the thread.

    We do hope you enjoy your visit. BHF Admin Team

GEC WITTON WORKS

Hi Everyone,

A family discussion led me to this forum. The question was where young couples meet these days. For many people the answer used to be “at work” in large companies that are no longer there.

In 1958 I started a drawing office apprenticeship, which included two years invaluable shop floor training, in 3DO. Six years later, still in 3DO, I met a young lady working in PCD and we have now been married for fifty eight years.

Another product of GEC was engineers. For more than thirty years I was an electrical surveyor with an insurance company, working the Midlands and beyond. I seemed to meet engineers from GEC everywhere and a regular comment was that a GEC apprenticeship was almost a passport to another job.

Hoping that I am not too late to respond to an earlier post by anorak147 regarding George Jenkins. He was the chief draughtsman in 3DO. Like many of his time a strict but respected man. Attached is a photo of George making a presentation to apprentice Eddie Hard for his marriage in 1959. The other photo, from 1963 in 3DO, shows draughtsmen Jack Westbury, Alan Sola and Frank Vincent, plus two apprentices.
 

Attachments

  • GEC 01.jpg
    GEC 01.jpg
    924.8 KB · Views: 16
  • GEC 02.JPG
    GEC 02.JPG
    717.4 KB · Views: 16
Hi Everyone,

A family discussion led me to this forum. The question was where young couples meet these days. For many people the answer used to be “at work” in large companies that are no longer there.

In 1958 I started a drawing office apprenticeship, which included two years invaluable shop floor training, in 3DO. Six years later, still in 3DO, I met a young lady working in PCD and we have now been married for fifty eight years.

Another product of GEC was engineers. For more than thirty years I was an electrical surveyor with an insurance company, working the Midlands and beyond. I seemed to meet engineers from GEC everywhere and a regular comment was that a GEC apprenticeship was almost a passport to another job.

Hoping that I am not too late to respond to an earlier post by anorak147 regarding George Jenkins. He was the chief draughtsman in 3DO. Like many of his time a strict but respected man. Attached is a photo of George making a presentation to apprentice Eddie Hard for his marriage in 1959. The other photo, from 1963 in 3DO, shows draughtsmen Jack Westbury, Alan Sola and Frank Vincent, plus two apprentices.
Very interesting Thanks for sharing
 
Do you know if any of the above worked in the Xpelair factory?
I worked there 1966-1970 ;)
I was there in 1967 when Xpelair was transferred from Colchester to Witton. I was Accountant for FHP motors and we made the Xpelair motors and Witton Moulded Plastics made the plastics. John Sturrock was FD of WMP and Arthur Scotson was MD. FHP bosses were Ken Brommel and later Harry Cairncross.
 
Much of my family worked for GEC Witton, Personnel Manager was Harry Cormill, his Brother Herbert Cormill was the Deputy Chief Inspector High Tension Switch Gear, my cousin Colin Byng Worked in the Hight .Tension Switch Gear Department, myself I started in the Patternshop but only for 6 months before it closed down. Now retired after working for many years as a Design Engineer for an Engineering Consultancy, can't believe near 75 now.
 
Just found from the 1921 Census that my great grandfather Thomas Griffiths worked as an electrical fitter at GEC Switch Gear Witton in 1921. That makes me one of three generations of my family that have worked in Witton at some point. Small wonder that I'm a Villa fan. ;) Here is a GEC advert from 1929, the administration centre at Witton, along with 2 photographs from 1922 and one from 1920:

1731072860133.png 1731074007401.png 1731073037780.png1731073335042.png
 
Hi, Just seen this thread about GEC (Witton Works). My Late Great Aunt (Mary J Williams Born 1923 - 181 Deykin Anvenue - Witton) worked as a 'Stator Winder' in 1939. I'm unsure if she worked at GEC as she had a pension from ICI (30 years service). But I do remember GEC being mentioned as a young boy when I had visited her with my parents. So could my Late Great Aunt have been a 'Stator Winder' at ICI in 1939?
Thanks
Charles
 
Hi, Just seen this thread about GEC (Witton Works). My Late Great Aunt (Mary J Williams Born 1923 - 181 Deykin Anvenue - Witton) worked as a 'Stator Winder' in 1939. I'm unsure if she worked at GEC as she had a pension from ICI (30 years service). But I do remember GEC being mentioned as a young boy when I had visited her with my parents. So could my Late Great Aunt have been a 'Stator Winder' at ICI in 1939?
Thanks
Charles
Charles, welcome to the Forum, a really great place with super folks, enjoy!
 
Thanks Richard/ Ray.

So if my Aunt (Mary J Williams - marital name Kingdom) worked at a 'Stator Winder' (second line down on image)' then SHE would have worked at GEC (in Small Motors, Standard Motors or Fan Shop)?

Please can you clarify your further comment below:

'By t the site of ICI Higgs Motor in 1939 some took over male jobs'

Rgds

Charles
 

Attachments

  • MJK Diary.jpg
    MJK Diary.jpg
    1.2 MB · Views: 7
Back
Top