If I remember correctly, Mould Bros, was on the left side of the Stratford Road, just past Auckland Road, going into town. It has been over sixty years since I went past that way, but as I sat on the bus when it passed Mould Bros, I recall the big front doors would often be open. I often wondered what they did there. Was it a foundry?
Eddie
Janice it is Tanworth Lane not Tamworth, as shown above.
Sent from my LG-D802 using Tapatalk
Just found this post, I know it old, but wondered what you found out about Peter Mould, and if you finished the book on Ken Miles? Peter Mould was my father.Thanks for your help everyone. I am trying to collect a bit of background on Peter Mould. He was a racing driver and was friends with Ken Miles who I am writing about.
Hello John, please PM me.Just found this post, I know it old, but wondered what you found out about Peter Mould, and if you finished the book on Ken Miles? Peter Mould was my father.
John mould
It was indeed a foundry! I lived in Auckland Road in the 50's. We used to look inside when they left the sliding doors open on Auckland Road, at all the molten metal and furnaces. they sometimes unloaded stillages of scrap metal in the doorway. Once a stillage was fill of brass badges to be melted down. Me and my mates grabbed a handful and scarpered back home after one of the workers gave chase up the streetIf I remember correctly, Mould Bros, was on the left side of the Stratford Road, just past Auckland Road, going into town. It has been over sixty years since I went past that way, but as I sat on the bus when it passed Mould Bros, I recall the big front doors would often be open. I often wondered what they did there. Was it a foundry?
Eddie
No problem Maurice, Was only reflecting on my past. As we all approach the great Brummie land in the sky its good to look back and rememberDave Haw,
Welcome to the Forum. Sadly NorfolkBrummie passed away a while ago now, hence the Gone but not forgotten status under his avatar.
Maurice
John. PM me if you get a moment. I remember your father.Just found this post, I know it old, but wondered what you found out about Peter Mould, and if you finished the book on Ken Miles? Peter Mould was my father.
John mould